Telephone +44 (0)1782 393843
Aim IVA Approved Plug and Play Kit Car Dash

Kit Car Dash          Fitting         Technical Specs          Downloads

Aim IVA Compliant ‘Plug and Play’ Dash

For OEM and Kit Car Builders!

The IVA Compliant ‘Plug and Play’ Dash, is a complete Road-Legal Display Solution for OEM, kit car and race car Builders. The kit has pre-configured, simple wiring connections, for all the relevant electrical items of your vehicle such as Indicators, Lights, Fuel Gauge, Hazard Lights, Handbrake Warning etc.

The key to the system, is the application of Aim Vehicle Interface (VIM) Module, designed to integrate with the Aim Strada Dash Display, to offer a ‘Plug & Play’ easy installation of your vehicle electrics. This is all connected to your vehicle’s Engine ECU, to allow easily configurable warning lights and gauges as well as Speed / Gears Revs etc.

The Kit Includes:

  • Road Legal IVA Compliant 5” TFT Colour Display Dash
  • Vehicle Interface Module (ViM)
  • Wheel Speed Sensor
  • Simple Wiring Loom
Aim IVA Approved Plug and Play Kit Car Dash

Easy Fit?

Once the dash is mounted in the vehicle, any qualified auto electrician will be able connect it all within a day, making the IVA Approved Kit Car Dash Kit,  a complete solution for kit car and road car Builders, who need a fully IVA compliant Dash Display for their build. With a pre-configured wiring loom, this offers a simple and cost effective legal way, to get a new digital display in your car.


No Problem, we can take a RPM feed from any Coil or Tacho Signal to make it all come alive.

Aim MXS Strada Plug and Play TFT Dash Display

The IVA Approved, 5″ colour ‘Plug and Play’ Car Dash Display, is used on kit cars all over the world. With its clever ECU link, it acquires data from your vehicle engine, making it relatively easy to fit. When used with our Vehicle interface Module (VIM), it allows for a simple connection to all your lights and sensors.

Aim MXS Strada Icons

High Contrast TFT Display

The Aim MXS Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields. A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the push buttons provided.

MXS Strada Analog Digital Inputs

Watch Your Data in Pre-Configured Pages

The MXS Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

MXS Strada Analog Digital Inputs

Flexible Shift Lights and Alarms

The ten multicolored RGB shift lights on the MXS Strada can be customized to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions and colors and you can select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

MXS Strada Analog Digital Inputs

Race Studio 3

MXS Strada is to be configured via Race Studio3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

MXS Strada Race Studio 3
MXS Strada Race Studio 3